Airplane Single Engine Sea Complete!


This is a regular blog post. Show notes and links to show audio appear in other posts.

Just a brief post to update progress. Five hours of dual, a 1.1-hour checkride, and I’m one of the planet’s newest seaplane pilots! I got my airplane single engine sea (ASES) rating this weekend with Tom Brady near Traverse City, Michigan.

I have something like four hours of audio (including the checkride!) to edit and turn into an episode or two. I also shot some video that I’ll be trying to make into something postable soon.

Contact info for Tom Brady at Traverse Air:

294 N West Silver Lake Road
Traverse City, Michigan 49686
231-943-4128
www.traverseair.com

Multi-Engine Rating – Day 2 – Rating Complete!

Subscribe to Airspeed through iTunes or your favorite other podcatcher. Or listen online right here by clicking: http://media.libsyn.com/media/airspeed/AirspeedMultiDay2.mp3. It’s all free!

The feeling is starting to come back in my right leg and I can almost open and close my left hand again.

But it’s all worthwhile because I just added Airplane Multiengine Land to my ticket! And it doesn’t have the VFR restriction. Too cool!

I just finished the two-day accelerated multi-engine course with Tom Brady of Traverse Air. We flew at Wexford County Airport in Cadillac (KCAD) Saturday and Sunday. Two flights of 2.0 each and four instrument approaches and nine landings Saturday. Sunday was two shorter flights of 1.5 hours each and four instrument approaches and seven landings. Then the checkride Sunday afternoon with 1.2 (pilot in command!) hours, one instrument approach, and two landings.

I also got my complex endorsement as part of the process.

Lots of studying for this. A lot to get into your head in just two days. Here’s the obligatory parking-lot engine failure drill. I think I had just stomped on the ball and was going to full forward on the levers here.

That would be the left engine and prop and, yes, that would be the prop feathered and not turning. We did two or three full-feathered shutdowns throughout the training and the checkride. This is the second one – on the last flight with Tom. Pretty benign, actually. It’s really amazing how much drag you get with a windmilling prop that’s full forward. Other than a fair amount of rudder and some bank into the good engine, it’s pretty much like flying with both engines at lower power once you get the dead engine shut down and feathered.

Capt. Force at the controls. This was on the way out to the practice area after an engine failure on the runway and another right after takeoff. Note the maneuver cheat sheet stuck in the headliner, ready for reference. Whereas I simply memorized the setup for other checkrides, there’s just too much information and too short a time to internalize all of the maneuver setups. Memorize the stuff that is truly memory stuff (e.g. push up, clean up, gas, pumps, verify, feather) and use checklists for the other stuff. I made a lot of outlines in law school, but the primary benefit of the outlines were actually making the outlines. It usually took only a couple of glances at the cheat sheet in the course of setting up for a given maneuver, but it was very helpful knowing that it was there.

Multi instructor extraordinaire Tom Brady in the right seat. Tom made the whole thing systematic and as easy to digest as possible. I’m not saying that it was easy. It wasn’t. But Tom did a great job of presenting the material in a cogent way that could be rapidly absorbed by a competent pilot who arrived prepared.

It’s an accelerated course. In Tom’s or any other accelerated course, you’re going to have to show up having read all of the materials and having a good understanding of the theory before you get in the car to go to the airport. You should be current and proficient in single-engine aircraft and it would be a great idea to have some complex time, too. (I got my only complex time just a few days before the multi training, but even that little bit really helped.)

You’ll have to have all of your stick and rudder skills second nature because you will spend the entire weekend working on the multi-specific stuff. You must have your A-game together so that you can pay attention to the multi-specific information. There’s only enough time (and you probably only have enough energy) to learn the multi stuff. If you’re not used to holding an airspeed within five KIAS, holding an altitude within 50 feet, and otherwise doing what you need to do in a single, all of those basic things will take up bandwidth that you need for the multi. You don’t have time or energy enough to take the rust off of your single-engine flying skills while picking up the multi skills. I’m usually pretty good with airspeed, altitude, and other precision matters. But I was consistently 100-200 feet high and a little fast in the Apache until late the second day. I don’t want to think about what this weekend would have been like if I hadn’t gotten up in the Cutlass a few days before.

Lastly (at least until I get an episode out covering the whole training experience), is it just me or does everyone draw great designated examiners? Kevin Spaulding gave me a great checkride. He started with a measured and thoughtful discussion of what we were going to do and used that discussion as an outline to talk through the required information. Weight and balance, performance, the elements of Vmc, how those elements affected maneuverability, etc. Then he was relaxed and objective during the checkride.

I floated the cabin once on the instrument approach. I think I pushed at the same time there was a downdraft, but if there really wasn’t a downdraft, I’ll take the responsibility. But that was a huge float.

Unlike many of the training approaches, I nailed the heading the whole way down the stairs. I got a little busy playing with the power and that might have contributed to some of the pitch oscillations. As soon as I relaxed a little on the corrections, things got a lot smoother. Funny how that works . . .

If you’re near Traverse City or Cadillac, Michigan (or if your family can find ways in those places to amuse themselves while you’re flying your ass off for a couple of days), consider the accelerated multi-engine program at Traverse Air with Tom Brady.

Traverse Air, Inc.
294 West Silver Lake
Traverse City, Michigan 49686
231-943-4128
tbrady294@charter.net
http://www.traverseair.com/

Tom also does seaplane ratings in a PA-12! Hmmmm. I think we’re going to Traverse City for vacation this summer . . .

Multi-Engine Training – Day 1

Subscribe to Airspeed through iTunes or your favorite other podcatcher. Or listen online right here by clicking: http://media.libsyn.com/media/airspeed/AirspeedMultiDay1.mp3. It’s all free!

Day one of multi training. I am a noodle. Nothing like four or five hours of mortal combat in the skies to take a little out of you.

Two flights today with Tom Brady of Traverse Air in his 1957 Piper Apache (PA-23-150) N3207P. Met Tom at the terminal building at Cadillac (KCAD) this morning at about 9:30. We talked about the training and the maneuvers and then went out to see the aircraft. After a brief tour, it was time to start her up and get airborne.

The maneuvers are fairly straightforward and basically amount to all of the elements of flying that you don’t get in a single-engine aircraft. The most similar stuff to single-engine flying was the stalls and steep turns. Steep turns are essentially the same, except that there’s no power change involved. You just go around at 20” MP and 2,200 RPM.

Stalls are a little different in that we didn’t go to full break. Additionally, power-on stalls are done at 18” manifold pressure (as opposed to 25” of more manifold pressure on a normal takeoff takeoff). Fine with me. I’d rather not be at full takeoff power with 150 HP on each wing with the possibility of asymmetric evils if the break happened in an uncoordinated way.

The other maneuvers are concentrated on engine-out operations. All of this is brand new territory. The instructor fails an engine in one way or another, depending on the circumstances, and you compensate in all of the appropriate ways.

If you’re close to the ground, the instructor will simulate an engine failure using the throttle, which isn’t as authentic, but is safer. We did a couple of failures on takeoff, at least 500 feet AGL. Failures at altitude are usually done by the instructor pulling the mixture.

In any case, you look at the ball of the inclinometer and step on it hard and then bank about five degrees into the good engine. Then it’s “power up” (all of the handles – throttles, props, and mixes full forward), “clean up” (flaps and gear up), check the gas, and check the electric boost pumps.

After that, you configure the aircraft to fly as best it can with just one engine. That means identifying the dead engine (“dead foot, dead engine” – whichever foot isn’t pushing on the pedal is the “dead foot” and that tells you which engine is out). You pull the throttle on that engine. No change? Leave it off. Same with the prop. No change? Leave it off. Then you secure the dead engine by pulling the mix.

Then you fly the airplane at blue line (Vyse or 95 MPH on the Apache) until told to recover or land.

The other maneuver is Vmc demonstration. This amounts to flying the airplane to (but not over!) the edge of its control envelope. This amounts to flying the airplane to or near Vmc (generally 78 MPH) in the configuration that has the most asymmetric thrust condition with as many factors as possible set to make control difficult and, generally, producing the circumstances most likely to put the airplane on its back. Left engine out and windmilling (not feathered) right engine full power and prop full forward. Gear up. No flaps. You get into this condition and then you slow up the airplane to Vmc and recover at the first sign of incipient loss of control. That means a buffet, a heading change, or similar indications.

And here’s the thing. Unlike a lot of single-engine maneuvers that are very reminiscent of this condition, you don’t push the good engine to full power. After all , it’s already there and that’s part of what’s getting you into the situation. No, you push the nose over and decrease the power on the good engine. That’s so the good engine doesn’t whip its side of the airplane over when the other wing stalls.

And here’s the other thing. Big thing, kind of. Unexpected anyway. I assumed that I was just getting the rating VFR. I assumed that the multi-engine VFR and multi-engine IFR ratings were separate things. After all, I’m getting the multi primarily so that I can qualify for the SIC type rating in the DC-3 in May down in Georgia. But it turns out that there’s simply a multi-engine rating and, if you don’t do the IFR part, you simply get a restriction saying that the multi-engine rating is VFR only.

I know. Six in one and a half dozen in the other. And I may still have it wrong. But I found out when Tom and I sat down that I can get the rating without the VFR limitation this weekend. All I have to do is fly an approach as a part of the checkride with an engine failure thrown in for fun.

I flew four localizer approaches today, the first two without the hood and the second two with the hood. Talk about being busy! Holy crap! I won’t be disappointed if I end up having the restriction on my ticket, but it would be really nice to get the rating without the VFR-only restriction. I’m going to have to chair fly a few approaches tonight in preparation.

More later!